UGUESS Silk PLA+ Tricolor 3D Printer Filament, 1.75 mm, 1 kg

UGUESS Silk PLA+ tricolor filament is a 1 kg spool in red, blue, and gold for FDM 3D printing. Its silk finish and color transitions are aimed at decorative models, while the listed diameter tolerance and print-temperature ranges give buyers starting points for printer setup.

At a glance

The listing describes three colors blended through the filament, with a shiny silk-like finish suited to decorative pieces.
Manufacturer-listed settings are a 200‑240℃ nozzle, 50‑65℃ build plate, and 50‑200 mm/s print speed.
The claimed ±0.03 mm diameter tolerance provides a useful sizing reference, but does not guarantee printer-specific results.
The seller describes the filament as pre-dried and vacuum-sealed with desiccants.

Price

$18.89Save 10%

Reference price: ~~$20.99~~

Price checked: Nov 12, 2026

View offer Ahead of Black FridayExplore the selection

Pros and cons

Pros

One 1 kg spool supplies a sizable amount of tricolor filament without requiring a multi-spool bundle.
Red, blue, and gold gradients and a silk sheen are geared toward display models and ornaments.
A listed diameter tolerance and temperature and speed ranges give a starting point for dialing in FDM prints.

Cons

The tricolor gradient and glossy silk effect are specialized for appearance-focused prints rather than a plain single-color finish.

Technical specifications

12 specifications

Identity
Brand	UGUESS
Color	Pla+ Silk 1kg Red/Blue/Golden
Filament type	Silk PLA+

Dimensions and installation
Weight listed	1 kg
Filament diameter	1.75 millimeters
Diameter tolerance	±0.03 mm
Compatible printer type	most mainstream FDM 3D printers

Printing
Recommended nozzle temperature	200‑240℃
Recommended build plate temperature	50‑65℃
Recommended print speed	50‑200 mm/s

Material and finish
Color combination	Red/Blue/Golden
Spool quantity	1‑pack

What to know before buying

Listing details to confirm

The 1.75 mm size and FDM compatibility are listing claims. Confirm they match your printer and filament path, and treat the recommended settings as starting points rather than guaranteed results.

Who is it for?

A good fit for

FDM printer owners whose machines accept 1.75 mm filament.
Makers printing decorative figures, miniatures, ornaments, or gifts where multicolor gradients and sheen are desirable.
Buyers looking for a single 1 kg spool rather than several smaller color spools.

Less suited to

Users who need a plain, uniform single-color filament.
Users whose printer requires a filament diameter other than 1.75 mm.

UGUESS Silk PLA+ Tricolor 3D Printer Filament, 1.75 mm, 1 kg · photo 2 — Additional product photo 2

Frequently asked questions

What printer type is this filament listed for?

The listing says it is compatible with most mainstream FDM 3D printers and gives a diameter of 1.75 millimeters. Check your printer's accepted filament size before buying.

What colors are in the spool?

The listed combination is red, blue, and gold, described as a tricolor gradient with a silk-like sheen.

What print settings does the listing recommend?

It lists a nozzle temperature of 200‑240℃, a build plate temperature of 50‑65℃, and a print speed of 50‑200 mm/s. These are manufacturer recommendations, not independently verified settings.

How much filament is included?

The listing identifies one 1 kg spool.