SKIL MS6305-00 10-Inch Dual-Bevel Sliding Miter Saw

1 / 7

Product guide

SKIL MS6305-00 10-Inch Dual-Bevel Sliding Miter Saw

The SKIL MS6305-00 is a corded 10-inch dual-bevel sliding miter saw with a claimed 15-amp motor and LED shadow line. Its stated crosscut capacity reaches 2x12 lumber at 90 degrees, with angled cuts and stops for common miter positions.

At a glance

LED shadow line helps show the intended cut line. The manufacturer claims greater accuracy than traditional lasers.
Sliding action is specified for crosscutting lumber up to 2x12 at 90 degrees and 2x8 at 45 degrees.
Dual bevel with stated left and right miter adjustment up to 50 degrees.
Tall sliding fences are described for vertical base molding and nested crown molding.

Price

$229.00Save 18%

Reference price: ~~$279.99~~

Price checked: Nov 14, 2026

View offer Ahead of Black FridayExplore the selection

Often bought together

BORA Miter Saw Stand Universal Fit Heavy Duty Portable Design - PM-4000 | Folding miter saw table, quick-release tool mounts, 500-lb load capacity, 114 inches of support, mitre chop saw stand

$91.20

Pros and cons

Pros

The sliding design and stated crosscut capacity suit wider boards than a fixed-head saw of similar blade size may accommodate.
Dual-bevel adjustment can reduce the need to flip a workpiece for opposing bevel cuts.
A shadow line provides a visible blade-alignment reference without relying on a laser.

Cons

At 39.4 pounds, it is not a lightweight tool to reposition frequently, despite the listing's portability language.

Technical specifications

24 specifications

Identity
Brand	Skil
Model	MS6305-00
Saw type	10" Dual Bevel Sliding Miter Saw

Power and blade
Power configuration	Corded Electric
Voltage	120 volts
Current rating	15 A
Rated wattage	1800 watts
Listed speed	4800 rpm
Blade diameter	10 inches
Blade material	High Speed Steel
Blade teeth	40
Blade arbor hole diameter	5/8 IN.
Cord length	1.83

Cutting and adjustment
Miter range	Cuts up to 50 degrees left and right with 11 positive stops at most used angles
Dual-bevel stop positions	48° & 45° left, 0°, and 45° right
Crosscut capacity claim	Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees
Base molding support	4-1/2” base molding vertically
Crown molding support	6-1/4” crown molding vertically nested
Bevel detents	Left: 0°, 45°,48° / Right: 0°, 45°
Miter detents	Left: 0°, 15°, 22.5°, 31.6°, 45° / Right: 0°, 15°, 22.5°, 31.6°, 45°

Dimensions and installation
Listed dimensions	35.43"L x 22.44"W x 14.17"H
Weight listed	39.4 pounds
Handle material	Plastic
Warranty description	3 Year limited warranty

What to know before buying

Listing details to confirm

The listing gives conflicting speed figures: 4800 rpm in the specifications and feature text, but 5000 rpm in the manufacturer details. Confirm the speed and applicable measurement before relying on it. It also describes 11 positive miter-stop positions while another section lists 9 detents and enumerates five angles per side. The included-components list spells the extension rods as “Extention,” so confirm the supplied pieces in the selected listing. The stated crosscut capacity and molding support are manufacturer claims, not independently established measurements.

What’s in the box

Included

Miter saw
Left and right extension rod sets
Dust bag
Hex key
Clamp

Who is it for?

A good fit for

Woodworkers and trim installers cutting wider boards, bevels, and common miter angles with a corded saw.
Buyers who value a visible shadow-line cut reference and included work clamp.

Less suited to

People who need cordless operation or regularly carry a saw over long distances.
Buyers who require one consistently stated no-load speed or fully reconciled stop-position details without checking the listing first.

SKIL MS6305-00 10-Inch Dual-Bevel Sliding Miter Saw · photo 2 — Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 2,286 ratings

5 stars80%80%
4 stars12%12%
3 stars3%3%
2 stars2%2%
1 star3%3%

Customer feedback describes accurate hardwood cuts, a useful shadow line, ease of setup and use, and perceived value. Bevel adjustment and durability receive mixed reports, including both convenient adjustment experiences and reports of difficulty, as well as differing expectations about how long the saw lasts. These impressions may matter for frequent angle changes or sustained work, but they do not establish performance or lifespan for an individual unit.

Positive themes

Customers report accurate cuts and appreciate the shadow line.
Customers describe setup and use as easy and mention value and precision.

Mixed feedback

Feedback is mixed on bevel adjustability, with some finding it convenient and others finding it tricky.
Durability impressions vary, including reports of long service and reports of failure after two months.

Frequently asked questions

What is the stated cutting capacity?

The listing claims crosscuts up to 2x12 lumber at 90 degrees and 2x8 lumber at 45 degrees. Treat these as manufacturer-listed capacities.

Does this saw bevel in both directions?

Yes. It is described as dual bevel, with listed stops at 48 and 45 degrees left, 0 degrees, and 45 degrees right.

What comes with the saw?

The manufacturer contents list names the saw, left and right extension rod sets, a dust bag, a hex key, and a clamp. Check the selected listing because the extension-rod wording is unclear.

Is the listed speed consistent?

No. The product details and feature text state 4800 rpm, while another manufacturer details section states 5000 rpm. Confirm the applicable specification before purchase.