OVERTURE OVPETG175 High-Speed PETG Filament, 1.75 mm, 1 kg, Pink

1 / 7

Product guide

OVERTURE OVPETG175 High-Speed PETG Filament, 1.75 mm, 1 kg, Pink

High-Speed: OVERTURE OVPETG175 is a pink PETG filament spool listed at 1.75 mm diameter and 1 kg. The listing claims compatibility with multi-material systems and printing speeds up to 300 mm/s, while recommending settings that span a wide range. Customer feedback is mixed on print reliability, adhesion and brittleness, so this is best considered by buyers willing to tune and assess their own printer setup.

At a glance

Listing describes the PETG formula as intended for high-speed printing and multi-material systems such as AMS or MMU.
Claimed dimensional accuracy is +/- 0.02mm, and suggested nozzle and bed temperatures are provided.
The listing says the spool is neatly wound and vacuum-sealed and pre-dried.

Price

$16.19Save 10%

Reference price: ~~$17.99~~

Price checked: Nov 13, 2026

View offer Ahead of Black FridayExplore the selection

Often bought together

OVERTURE High Speed PLA Filament 1.75mm 3D Printer Filament,1kg Black | Neatly Wound 1kg Spool (2.2lbs) Rapid PLA, Dimensional Accuracy +/- 0.02 mm, Fit Most FDM 3D Printers (Black)

$12.65

OVERTURE Matte PLA Filament 1.75mm, 1kg Matte Light Brown | Low Warp & Smooth Finish, 1kg (2.2lbs) Dimensional Accuracy +/- 0.02mm, Fit Most FDM Printer (Matte Light Brown)

$15.99

Pros and cons

Pros

A 1 kg spool and 1.75 mm diameter are clearly specified for checking against a printer's filament requirements.
The listing provides a temperature range and speed range to use as starting points when setting up prints.
Compatibility with multi-material systems is claimed, which may suit buyers printing with an AMS or MMU setup.

Cons

Customer feedback is mixed on print quality and reliability, with reports ranging from smooth prints to repeated failures.
Customer feedback also differs on strength, including reports describing the filament as brittle.

Technical specifications

12 specifications

Identity
Brand	OVERTURE
Model	OVPETG175

Dimensions and installation
Weight listed	1 kg
Filament diameter	1.75 millimeters

Materials and color
Material listed	Polyethylene Terephthalate Glycol
Color	Pink

Printing and storage claims
Recommended nozzle temperature	230-260°C
Recommended bed temperature	65-70°C
Recommended printing speed	30-300mm/s
Claimed dimensional accuracy	+/- 0.02mm
Unopened spool shelf life	1-year shelf life for unopened spools (proper storage required)
Warranty description	1-year Warranty

What to know before buying

Listing details to confirm

The recommended speed spans 30-300mm/s, while the listing also describes printing up to 300mm/s. Treat that upper figure as a manufacturer claim, not a guaranteed result, and follow printer-specific settings. The one-year shelf-life claim applies to unopened spools with proper storage. Customer experiences vary on adhesion, reliability and brittleness, so results may depend on setup and handling.

Who is it for?

A good fit for

3D printer owners whose machines accept 1.75 mm PETG and who want a pink 1 kg spool.
Buyers seeking PETG that the listing claims can be used with an AMS or MMU and are prepared to tune print settings.

Less suited to

Buyers who need reliably consistent outcomes without dialing in settings, given mixed customer reports of print failures and brittleness.
Anyone whose printer requires a filament diameter other than 1.75 mm.

OVERTURE OVPETG175 High-Speed PETG Filament, 1.75 mm, 1 kg, Pink · photo 2 — Additional product photo 2

Customer reviews on Amazon

4.3 / 5 · 16,824 ratings

5 stars70%70%
4 stars12%12%
3 stars6%6%
2 stars3%3%
1 star9%9%

Customer feedback is mixed: some report smooth prints and good adhesion, while others describe repeated print failures and brittle filament. That variation matters for functional or unattended prints, even though the listing claims a high-speed formula, neat winding and tight dimensional accuracy. The aggregate rating is positive overall, but the spread of ratings and reported experiences means it should not be treated as a guarantee of consistent performance.

Positive themes

Some customers say it works well and produces smooth prints with good adhesion.

Negative themes

Some customers report failed prints and describe the filament as brittle.

Mixed feedback

Customers differ on strength and value, with experiences ranging from strong and worth the price to brittle and not worthwhile.

Frequently asked questions

What filament diameter and spool weight are listed?

The listing specifies 1.75 millimeters in diameter and 1 kg in weight.

What print settings does OVERTURE recommend?

The listing gives a nozzle temperature of 230-260°C, a bed temperature of 65-70°C and a speed range of 30-300mm/s. These are manufacturer recommendations, not independently verified results.

Is this filament claimed to work with AMS or MMU systems?

Yes. The listing claims AMS and MMU suitability. Confirm the selected printer and feed system support this filament before buying.

What do customers report about printing results?

Feedback is mixed. Some customers report smooth prints and good adhesion, while others describe print failures and brittle results. The aggregate rating is generally positive, but does not remove that variation.