Meuymeu 16-Color PETG Filament Bundle, 1.75 mm

Meuymeu 16-Color PETG Filament Bundle supplies small spools across a broad palette for switching among functional and decorative prints. The listing describes 16 spools of 200 g each and gives printer settings that may need adjustment for your machine and model.

At a glance

Sixteen 200 g spools provide a wide choice of colors without committing to a single large spool.
Listing describes the PETG as suitable for functional parts and decorative models.
Recommended nozzle, bed, and speed ranges are provided, with a warning that settings vary by printer and print conditions.

Price

$54.98Save 31%

Reference price: ~~$79.99~~

Price checked: Nov 14, 2026

View offer

Often bought together

Bambu Lab P1S Combo, P1S 3D Printer and AMS, Multi-Color 3D Printing | MakerWorld Model Library, Multi-Color 3D Printing,High Speed & Precision CoreXY 3D Printer,Auto Bed Leveling, Ready-to-Use

$479.00

3D Printing Super Glue Gel 1.75 oz - PLA ABS PETG TPU Instant Adhesive | non drip, gap filling, no run adhesive, CA glue, vertical bonds, clear, waterproof, heat resistant, anti-clog cap, PLA, ABS

$9.99

Pros and cons

Pros

Broad 16-color assortment includes black, white, gray, clear, red, green, blue, yellow, orange, purple, pink, peacock blue, peacock green, dark purple, khaki, and gold.
Small spool format makes it practical to change colors for separate projects.
The listed 1.75 mm diameter and ±0.03 mm accuracy give buyers specific feed dimensions to compare with their printer requirements.
The listing provides starting temperature and speed ranges rather than leaving PETG setup entirely unspecified.

Cons

At 200 g per spool, each color is a small quantity for larger prints or sustained use.
The broad assortment may leave limited material in any one color compared with buying larger single-color spools.

Technical specifications

9 specifications

Identity
Brand	Meuymeu

Dimensions and installation
Weight listed	2.2 pounds
Filament diameter	1.75mm
Dimensional accuracy	±0.03mm

Materials and protection
Material listed	Polyethylene Terephthalate Glycol

Bundle and print settings
Total material listed	3.2KG total material
Nozzle temperature	210–235°C
Bed temperature	55–65°C
Printing speed	100–200mm/s

What to know before buying

The listing presents recommended settings of 210–235°C nozzle, 55–65°C bed, and 100–200mm/s speed, but says actual settings depend on the printer, nozzle, model, and environment. Tune settings for your setup.

Who is it for?

A good fit for

Makers wanting many colors in small quantities for prototypes, organizers, models, toys, or decorative projects.
Users printing functional PETG parts such as brackets, holders, enclosures, or tool accessories who are comfortable dialing in slicer settings.
PETG users seeking a listed 1.75 mm filament with stated dimensional accuracy.

Less suited to

Projects requiring a large quantity of one color or long runs without spool changes.
Buyers who need a guaranteed print profile for a specific printer, since the listing says settings vary by setup.

Meuymeu 16-Color PETG Filament Bundle, 1.75 mm · photo 2 — Additional product photo 2

Customer reviews on Amazon

4.7 / 5 · 13 ratings

5 stars74%74%
4 stars26%26%
3 stars0%0%
2 stars0%0%
1 star0%0%

Aggregate ratings lean favorable, with ratings concentrated in the top two star categories, but the sample is small and no written feedback is provided here. That gives only a limited signal about buyer satisfaction and does not establish how reliably the filament prints. Buyers should weigh the many small 200 g colors against their likely print volume and tune the listed PETG settings to their own printer.

Frequently asked questions

How much filament is included?

The listing describes 16 individual 200 g spools and states a total of 3.2 kg.

What diameter is the filament?

The listing specifies 1.75 mm diameter with ±0.03 mm accuracy. Confirm that your printer accepts 1.75 mm filament.

What print settings are recommended?

The listing recommends a 210–235°C nozzle, a 55–65°C bed, and 100–200mm/s printing speed. It notes that results depend on printer and print conditions.

Is this intended for functional parts or decorative prints?

The listing describes uses including brackets, holders, enclosures, mechanical models, organizers, toys, and decorative projects. It also says wall thickness, infill, and model structure affect finished-part needs.