UGUESS Silk PLA+ Tricolor Filament, 1.75 mm, 6 × 250 g

UGUESS Silk PLA+ is a six-spool tricolor filament bundle for FDM 3D printing. Its color-changing silk finish is aimed at decorative models, while the 250 g spools offer smaller amounts of each gradient for sampling several palettes.

At a glance

Six spools use tricolor gradients with a silk-like sheen, intended for decorative prints such as miniatures and figurines.
The listing claims ±0.03 mm diameter tolerance and gives nozzle, build plate, and speed recommendations.
Manufacturer says the filament is factory pre-dried and vacuum-sealed with desiccants.

Price

$25.18Save 26%

Reference price: ~~$33.99~~

Price checked: Nov 12, 2026

View offer Ahead of Black FridayExplore the selection

Often bought together

Meuymeu 8P Multicolor Glow in the Dark PLA+ & Tricolor Silk Filament 1.75mm | 200g Spool Bundle 3D Printer Fillament with Shiny Tricolor and Glow in the Dark Colors, Bubble‑Free & Smooth Printing

$32.39

Pros and cons

Pros

Six distinct tricolor combinations let a buyer try multiple gradient palettes without committing to full-size spools.
The 1.75 mm format is stated to suit most mainstream FDM printers.
Published temperature and speed ranges provide a starting point for printer setup.

Cons

At 250 g per spool, each color combination provides less material than a typical larger spool, which may constrain lengthy prints.

Technical specifications

12 specifications

Identity and format
Brand	UGUESS
Filament diameter	1.75 millimeters
Number of spools	6
Spool quantity	250g per spool
Total filament weight	1500g
Filament type	PLA+
Color combinations	Red‑Yellow‑Blue/Black‑Gold‑Purple/Blue‑Black‑Purple/Blue green‑Burnt orange‑Light yellow/Emerald green‑Gold‑Burnt orange/Purple‑Burnt orange‑Blue green

Claimed printing specifications
Diameter tolerance	±0.03 mm
Recommended nozzle temperature	200‑240℃
Recommended build plate temperature	50‑65℃
Recommended print speed	50‑200 mm/s
Printer compatibility	most mainstream FDM 3D printers

What to know before buying

The color names and the advertised count are not fully aligned: the listing describes six spools and six colors in total, but enumerates six tricolor combinations. Confirm the selected bundle's actual color set if specific gradients matter. Temperature and speed figures are manufacturer recommendations, not verified settings for every printer. The stated tolerance and compatibility are also manufacturer claims.

Who is it for?

A good fit for

FDM printer owners seeking glossy, multicolor gradients for figurines, miniatures, gifts, or other decorative models.
Beginners who want several smaller color spools and an advertised diameter tolerance.

Less suited to

Buyers needing a large quantity of one color for long or production runs.
Buyers who require confirmed exact bundle colors or independently verified print performance.

UGUESS Silk PLA+ Tricolor Filament, 1.75 mm, 6 × 250 g · photo 2 — Additional product photo 2

Frequently asked questions

How much filament is included?

The listing describes six 250 g spools, for a stated total of 1500 g.

What printer size does it fit?

The filament diameter is listed as 1.75 millimeters, and the manufacturer claims compatibility with most mainstream FDM printers. Check your printer's required filament diameter.

What settings does the manufacturer recommend?

The listing recommends a nozzle temperature of 200‑240℃, a build plate temperature of 50‑65℃, and a print speed of 50‑200 mm/s. These are starting recommendations rather than guaranteed settings for every printer.

Are the six listed colors six separate single-color spools?

The listing describes tricolor spools and lists six tricolor combinations, while also calling these six colors in total. The exact color arrangement is unclear, so confirm the selected bundle details if the palette is important.