best-deals.proDeals for the United States
Search
Bosch HC5005 SDS-max Carbide Rotary Hammer Bit, 3/8 in. x 13 in.1 / 7
Product guide

Bosch HC5005 SDS-max Carbide Rotary Hammer Bit, 3/8 in. x 13 in.

Bosch HC5005 Speed-X is a carbide rotary hammer bit listed for concrete drilling, with a 3/8-inch cutting diameter and an SDS-max shank. Its centering tip and inclined side cutters are intended to support accurate starts and faster cutting, while the SDS-max connection limits it to compatible hammers.

At a glance

  • The SDS-max shank is stated to fit SDS-max hammers, including Hilti hammers with TE-Y/TE-FY shanks.
  • A centering tip is described as guiding the bit through hard and reinforced concrete.
  • Inclined side cutters are intended to increase cutting speed.
  • The listed 3/8-inch by 13-inch size suits buyers matching a specific bit diameter and length.
Price
$25.19Save 56%

Reference price: $56.89

Price checked: Nov 14, 2026

View offer

Often bought together

Pros and cons

Pros

  • Carbide construction and a centering tip are specified for concrete and masonry drilling.
  • Stated compatibility with SDS-max hammers makes the intended tool interface clear.
  • A single listed bit supports replacement or task-specific purchase without a larger accessory set.

Cons

  • The SDS-max shank is a specific interface and will not suit buyers whose hammer requires a different shank type.

Technical specifications

12 specifications
Identity
BrandBosch
ModelHC5005
Dimensions and installation
Listed size3/8 In. x 13 In.
Cutting diameter9.53 millimeters
Shank typeSDS-Max
Weight listed4.54 g
Materials and design
Material listedCarbide
Cutting angle120 degrees
Flute typeParabolic
Point styleCenter Point
Number of flutes1
Use
Surface recommendationConcrete

What to know before buying

Listing details to confirm

The listing advertises a four-cutter tip in its manufacturer text, but the technical details list one flute and do not specify cutter count. Treat the cutter design as unconfirmed and verify it if that detail matters. The listed weight of 4.54 g is also unusual for a bit of the stated size, so confirm the weight if it is important.

What’s in the box

Included
  • 1 bit

Who is it for?

A good fit for

  • People drilling concrete or masonry with an SDS-max rotary hammer.
  • Buyers seeking a 3/8-inch diameter bit in the listed 13-inch size.
  • Precision anchoring or deep-drilling applications described by the manufacturer.

Less suited to

  • Users with SDS-plus or other non-SDS-max hammers unless their tool has an appropriate compatible setup.
  • Buyers needing a confirmed four-cutter design or relying on the listed weight without checking it.
Bosch HC5005 SDS-max Carbide Rotary Hammer Bit, 3/8 in. x 13 in. · photo 2
Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 170 ratings
  • 5 stars78%78%
  • 4 stars13%13%
  • 3 stars7%7%
  • 2 stars0%0%
  • 1 star2%2%

Aggregate customer ratings lean positive, with most ratings in the top category, but a smaller share is lower. Without written feedback, these figures do not reveal what buyers praised or criticized. Consider them limited satisfaction context rather than evidence of drilling performance or durability.

Frequently asked questions

What kind of hammer does the Bosch HC5005 fit?

The listing specifies an SDS-max shank and claims compatibility with SDS-max hammers, including Hilti hammers with TE-Y/TE-FY shanks.

What material and surface is this bit listed for?

It is listed as carbide, with concrete as the recommended surface. The manufacturer also describes masonry and concrete use.

Does the listing confirm a four-cutter tip?

No. Manufacturer text describes a four-cutter tip, but the technical details do not confirm cutter count and list one flute. Check the selected listing if the cutter configuration is important.

What is included?

The stated contents list is one bit.

Bosch HC5005 SDS-max Carbide Rotary Hammer Bit, 3/8 in. x 13 in. · photo 3
Additional product photo 3

Alternative options

Product details in Markdown